Diamond Wall One Coat Stucco Systems are code compliant plaster systems that create a long-lasting exterior cladding for residential and commercial projects.  One coat stucco has the appearance and advantages of traditional three coat stucco, but with increased energy efficiency, lower labor costs, and schedule savings.
Related Links & Downloads
Diamond Wall System | Diamond Wall PM System | Diamond Wall Insulating System

DIAMOND WALL ONE COAT STUCCO ADVANTAGES
  Low life-cycle costs Will last decades with little maintenance
  Durable and impact resistant Can withstand years of weather and physical abuse
  Cement-based
Fungus, rot, and insect resistant
  Fire-resistant Non-combustible and available in 1-hour fire resistant rated assemblies
  Offers a variety of finishes
Stucco, acrylic, stucco, paint, and stone are all finish options
  Reduced labor costs Only requires one base coat application
  Shorter construction schedule Finish coat can be applied in as little as 24-hours after the brown coat
  Improved Energy Efficiency Assembly’s R-value is increased when foam board is utilized
  Consistency
Factory blended mix requiring only sand and water to be added in the field
  Lower Weight Reduces the exterior cladding weight by approximately 50%
  Omega Support Comes with a warranty and the best technical support in the industry

Diamond Wall One Coat is available either as the Diamond Wall Insulating System, Diamond Wall System, or the Diamond Wall PM System.   All three systems consist of a 3/8-inch minimum thick layer of Diamond wall base coat that is embedded in metal lath.  A variety of finish options are available including ColorTek stucco, AkroFlex acrylic stucco, OmegaFlex acrylic stucco, AkroLastic elastomeric stucco, and AkroCoat paint finishes. 


Diamond Wall One coat stucco systems details

DIAMOND WALL ONE COAT SYSTEM


The Diamond Wall One Coat System is applied over approved weather barrier and solid sheathing.  The Diamond Wall base coat is a factory prepared blend of Type I-II Portland cement, chopped fibers, and proprietary ingredients field mixed with sand, water, and an optional admix.

Related Links & Downloads
System Data Sheet Product Data Sheet ICC-ES Report Details: PDF | AutoCAD
Specification Warranties Approved Applicator Request Form  


DIAMOND WALL INSULATING ONE COAT SYSTEM


The Diamond Wall Insulating One Coat System includes a layer of foam board insulation that may be applied over open wall framing or optional sheathing.  The foam board greatly increases the R-value of the wall assembly, which improves the energy efficiency of the building. 

Related Links & Downloads
System Data Sheet Product Data Sheet ICC-ES Report Details: PDF | AutoCAD
Specification Warranties Approved Applicator Request Form  


DIAMOND WALL PM ONE COAT SYSTEM


The Diamond Wall PM One Coat System offers an upgrade to current one coat stucco systems by providing improved crack resistance, flexural and tensile strength, and impact resistance.  It uses Diamond Wall PM Concentrate and is fielded mixed with the liquid Diamond Wall PM Admix.  The system is available as insulated and non-insulated.

Related Links & Downloads
System Data Sheet Product Data Sheet ICC-ES Report Details: PDF | AutoCAD
Specification Warranties Approved Applicator Request Form  Details: PDF | AutoCAD


Back to the Top